Product
Professional supplier of electronic screen printing solutions
NOx Sensor screen
- Commodity name： NOx Sensor screen
- 传感器行业概要： 1. Made using a highly wear-resistant emulsion and processed through a special process;</br> 2. The dimensional accuracy can reach ± 15 μ m, and the overlay printing accuracy is good;</br> 3. The thickness and resistance of the printing film are stable, and the difference between the front, middle, and later stages is small.
- 精密陶瓷行业概要： 1. Made using a highly wear-resistant emulsion and processed through a special process;</br> 2. The dimensional accuracy can reach ± 15 μ m, and the overlay printing accuracy is good;</br> 3. The thickness and resistance of the printing film are stable, and the difference between the front, middle, and later stages is small.
- 精密陶瓷-LTCC： 1. Made using a highly wear-resistant emulsion and processed through a special process;</br> 2. The dimensional accuracy can reach ± 15 μ m, and the overlay printing accuracy is good;</br> 3. The thickness and resistance of the printing film are stable, and the difference between the front, middle, and later stages is small.
Screen printing highlights
1. Made using a highly wear-resistant emulsion and processed through a special process;
2. The dimensional accuracy can reach ± 15 μ m, and the overlay printing accuracy is good;
3. The thickness and resistance of the printing film are stable, and the difference between the front, middle, and later stages is small.
Detail drawing
Finished picture
Recommend products
SPS-AS carbon fiber squeegee for duplex drum screen printing machine
SPS-AS carbon fiber squeegee is suitable for reciprocating cylinder screen printing machine. It uses carbon fiber board and Japanese ASM anti-static solvent-resistant polyurethane rubber. The printing quality is stable and the service life is high.
GM-IO is a UV curable screen printing insulating ink with excellent adhesion, high flexibility, good printability and UV curing fast drying characteristics, suitable for blood glucose meters, keyboard circuits, membrane switches and so on.
In the process of screen printing, squeegee, screen plate, substrate material and other mutual friction, generating static electricity. When static electricity accumulates to a higher voltage difference, the edge of the pattern will produce flying ink, drawing and other bad.SPS-ASM anti-static squeegee resistance <108Ω, part of the charge through the squeegee dissipation, reduce the voltage difference, to avoid flying ink and wire drawing and other problems.
In the process of cell production, the effect of screen printing will directly affect the conversion efficiency of the cell, the core of printing is the aspect ratio of the silver paste after printing. Therefore, the screen, silver paste and squeegee must remain innovative, when writing higher screen printing requirements in just ten years, the requirements of the gate line is becoming more and more fine, has been from the initial 60um into the current 30um, or even finer; Subsequent to the replacement of the squeegee (as shown in the figure below), and now SPS-AS-SL single-sided photovoltaic carbon fibre squeegee is becoming more and more popular!
FGB-MP Glass Fibre Board Squeegee
SPS-MP-X series squeegee is a new generation of one-piece squeegee specially developed by Plet and Japan Polyurethane Chemical Company for the narrow line width printing of battery cells. Compared with the traditional sanding squeegee, it has significant effect on wet weight control, printing life and efficiency improvement, etc. Using this squeegee can achieve the purpose of cost reduction and efficiency improvement.
1. Manufactured using Japanese squeegee processing, it exhibits superior solvent and wear resistance; 2. The fiberglass board scraping glue combines the fiberglass board with scraping glue, offering the elasticity of the scraping glue and the structural support of the fiberglass board. This allows for a stable printing angle to be maintained even during extended periods, ensuring uniform ink thickness.