Product
Professional supplier of electronic screen printing solutions
MS-TAF frosted Ink
- Commodity name： MS-TAF frosted Ink
Classification:
Keywords: Squeegee | Screen | Ink
Brief description
AF frosted series is for battery labels, membrane switches, signage, automotive instrumentation and other products on the use of printing on PET, PC sheet surface scratch resistance, excellent physical properties, the product is the surface of the decorative treatment of the UV light-curing coating series set, excellent scratch resistance, post-processing and good.
Product Characteristics
UV curing ink
1. Environmental protection: zero VOC emissions, in line with ROHS, halogen and other environmental requirements.
2. Energy saving: good adhesion under very low light conditions, suitable for high-speed printing.
3.Scratch-resistant: the whole series of products have a matte effect and also have good scratch resistance.
Thinner
Normal use does not add, need to add with special diluent
Storage conditions
Unopened used time is 1 year, open ink for 6 months, need to be stored in dry, cool, ventilated (5-30 °) conditions
Basic Test Technical Parameters
Model: MS-TAF100
Substrate: PC
Screen: 300 mesh polyester screen, photopolymer film thickness 8μ, tension 15 N
Drying: UV curing
Squeegee: 75A
| Test Items | Test Methods | Results |
| Adhesion① | 3M Tape Peeling | No peeling |
| Adhesion② | Finger Scratch | No scratches |
| Alcohol Resistant | Load 500g for 50 times | Non-transparent |
| Alkali-resistant | NaOH5% 8h immersion 100g tape test | Not OK |
| Water resistance | Soaking in 60° water for 36h 100g tape test | Not OK |
| Friction resistance | Rubber Test CS-10 200 times back and forth with 500g load | Anomaly-free |
| Hardness | Pencil hardness | HB |
Disclaimer: The above data obtained from laboratory testing, does not represent the end customer quality assurance, although the same parameters may be contrary to the situation, only to ensure that the purchase value and the value of use. Does not assume any user, buyer, distributor and other individuals or enterprises due to direct or indirect, special or accidental reasons for the loss of responsibility and liability, please test to meet the requirements in the batch to continue to use!
Recommend products
SPS-AS carbon fiber squeegee for duplex drum screen printing machine
SPS-AS carbon fiber squeegee is suitable for reciprocating cylinder screen printing machine. It uses carbon fiber board and Japanese ASM anti-static solvent-resistant polyurethane rubber. The printing quality is stable and the service life is high.
GM-IO is a UV curable screen printing insulating ink with excellent adhesion, high flexibility, good printability and UV curing fast drying characteristics, suitable for blood glucose meters, keyboard circuits, membrane switches and so on.
In the process of screen printing, squeegee, screen plate, substrate material and other mutual friction, generating static electricity. When static electricity accumulates to a higher voltage difference, the edge of the pattern will produce flying ink, drawing and other bad.SPS-ASM anti-static squeegee resistance <108Ω, part of the charge through the squeegee dissipation, reduce the voltage difference, to avoid flying ink and wire drawing and other problems.
In the process of cell production, the effect of screen printing will directly affect the conversion efficiency of the cell, the core of printing is the aspect ratio of the silver paste after printing. Therefore, the screen, silver paste and squeegee must remain innovative, when writing higher screen printing requirements in just ten years, the requirements of the gate line is becoming more and more fine, has been from the initial 60um into the current 30um, or even finer; Subsequent to the replacement of the squeegee (as shown in the figure below), and now SPS-AS-SL single-sided photovoltaic carbon fibre squeegee is becoming more and more popular!
FGB-MP Glass Fibre Board Squeegee
SPS-MP-X series squeegee is a new generation of one-piece squeegee specially developed by Plet and Japan Polyurethane Chemical Company for the narrow line width printing of battery cells. Compared with the traditional sanding squeegee, it has significant effect on wet weight control, printing life and efficiency improvement, etc. Using this squeegee can achieve the purpose of cost reduction and efficiency improvement.
1. Manufactured using Japanese squeegee processing, it exhibits superior solvent and wear resistance; 2. The fiberglass board scraping glue combines the fiberglass board with scraping glue, offering the elasticity of the scraping glue and the structural support of the fiberglass board. This allows for a stable printing angle to be maintained even during extended periods, ensuring uniform ink thickness.