Product
Professional supplier of electronic screen printing solutions
Brief description of MS-2000
MS-2000 is one of the water-based inks with a special effect of matte soft frosting, which is printed on the ink-coated surface.
Product Characteristics
MS-2000 Frosted is a water-based single-component and two-component ink, adapted to printing on PC materials, scratch-resistant, anti-pull-up, the product is used for automotive instrumentation (3D moulding can be done), film buttons and so on.
Baking conditions
Dry naturally for 24 hours, surface dry for 10 minutes, bake in the oven at 85° for 30 minutes.
Storage conditions
1 year for unopened used, 6 months for opened ink, stored in dry, cool, ventilated (5-30°) conditions.
Basic Test Technical Parameters
Model: MS-2000 Frosted
Curing agent: W-106 add 5%
Substrate: PC
Screen: 250 mesh polyester silk screen, photopolymer film thickness 8μ, tension 15N
Drying: Oven 85℃, 20 minutes
| Test items | Test Methods | In the end |
| Adhesion① | Baguette Test 3M Tape Peeling | Non-shedding |
| Adhesion② | Backward pointing | Non-shedding |
| Petrol-resistant | 50 round trips with a weight of 500g | OK |
| Alcohol-resistant | 50 round trips with a weight of 500g | Bottomless |
| Alkali resistance | NaOH5% Soak 8h 100g tape test | Not OK |
| Water resistance | Immersion in 60° water for 36h 100-gauge tape test | Not OK |
| Friction resistance | Rubber test CS-10 load 500g back and forth rubbing 200 times | Anomaly-free |
Remarks: The ink will be mixed with the hardener and the ink will react with the adhesive, the blended ink should be used up within 4-5 hours, the ink performance will be affected if it is used beyond the time.
Disclaimer: The above data is obtained from the laboratory test, does not represent the end customer quality assurance, although the same parameters may be contrary to the situation, only to ensure that the purchase value and the value of use. Do not assume any user, buyer, distributor and other individuals or enterprises due to direct or indirect, special or accidental reasons for the loss of responsibility and liability, please test to meet the requirements of the batch continue to use!
Recommend products
SPS-AS carbon fiber squeegee for duplex drum screen printing machine
SPS-AS carbon fiber squeegee is suitable for reciprocating cylinder screen printing machine. It uses carbon fiber board and Japanese ASM anti-static solvent-resistant polyurethane rubber. The printing quality is stable and the service life is high.
GM-IO is a UV curable screen printing insulating ink with excellent adhesion, high flexibility, good printability and UV curing fast drying characteristics, suitable for blood glucose meters, keyboard circuits, membrane switches and so on.
In the process of screen printing, squeegee, screen plate, substrate material and other mutual friction, generating static electricity. When static electricity accumulates to a higher voltage difference, the edge of the pattern will produce flying ink, drawing and other bad.SPS-ASM anti-static squeegee resistance <108Ω, part of the charge through the squeegee dissipation, reduce the voltage difference, to avoid flying ink and wire drawing and other problems.
In the process of cell production, the effect of screen printing will directly affect the conversion efficiency of the cell, the core of printing is the aspect ratio of the silver paste after printing. Therefore, the screen, silver paste and squeegee must remain innovative, when writing higher screen printing requirements in just ten years, the requirements of the gate line is becoming more and more fine, has been from the initial 60um into the current 30um, or even finer; Subsequent to the replacement of the squeegee (as shown in the figure below), and now SPS-AS-SL single-sided photovoltaic carbon fibre squeegee is becoming more and more popular!
FGB-MP Glass Fibre Board Squeegee
SPS-MP-X series squeegee is a new generation of one-piece squeegee specially developed by Plet and Japan Polyurethane Chemical Company for the narrow line width printing of battery cells. Compared with the traditional sanding squeegee, it has significant effect on wet weight control, printing life and efficiency improvement, etc. Using this squeegee can achieve the purpose of cost reduction and efficiency improvement.
1. Manufactured using Japanese squeegee processing, it exhibits superior solvent and wear resistance; 2. The fiberglass board scraping glue combines the fiberglass board with scraping glue, offering the elasticity of the scraping glue and the structural support of the fiberglass board. This allows for a stable printing angle to be maintained even during extended periods, ensuring uniform ink thickness.