Product
Professional supplier of electronic screen printing solutions
One-piece black high L-value ink
- Commodity name： One-piece black high L-value ink
- 汽车内饰-车载显示屏： 1、高L值，印刷过墨性好;</br> 2、耐化学、物理性能优异。
Description of PG Series
PG Series High L-value Black is a three-component ink specially developed for the application of products such as automotive one-piece displays and TP covers, which makes the screen look one-piece from a straight viewing angle.
Product Characteristics
Excellent physical and chemical resistance, high temperature resistance and UV resistance.
Ink characteristics
1. Good adhesion between ink layers.
2. Characteristic three-component combination takes into account both physical and chemical properties.
3. The printing performance and color difference values are relatively stable.
Uses
General Glass, Physically Tempered Glass, Chemically Tempered Glass.
Storage conditions
Unopened and unused for one year, 6 months after opening, stored in a light, dry and ventilated (5-30°) place.
Printing Materials
Ordinary glass, physically toughened glass, chemically strengthened glass.
Basic test technical parameters
Model: PG-971L Black/979 Da Yin Black (with additives)
Substrate: 2mm physically toughened glass
Screen: 300 polyester screen, photopolymer thickness 8μm, tension 20N
Drying: Directly after printing, sealed curing oven 160°/30min.
| Test items | Test Methods | In the end |
| Adhesion① | 3M Tape Peeling | Non-shedding |
| Adhesion② | Backward pointing | No scratches |
| Petrol-resistant | 50 round trips with a weight of 500g | OK |
| Alcohol-resistant | 50 round trips with a weight of 500g | OK |
| Alkali resistance | Immersion in 25°C/NaOH/5% solution for 2hr BAGGER TAPE TESTING | OK |
| Acid resistance | Immersion in H2S04/5% solution at 25°C for 2hr BAG TAPE TESTING | OK |
| Water resistance | 2hrImmersion in deionised water at 100°C for 2hr | OK |
| Durometer | Pencil hardness | 2H |
| Insulation resistance value | Measure its surface resistance at 5 points | ≥101 Ohm |
| High and low temperatures | 80°C/95%RH(8Hr)/-20°C(2hr) total 10 cycles | OK |
| Salt spray | Continuous spray 35°C//5% NaC1 in distilled water/120hr | OK |
Disclaimer: The above data obtained from laboratory testing, does not represent the use of end-customer quality assurance, although the same parameters may be contrary to the situation, only to ensure that the purchase value and value of use. Does not assume any user, buyer, distributor and other individuals or enterprises due to direct or indirect, special or accidental reasons for the loss of responsibility and liability, please test to meet the requirements in the batch to continue to use.
Recommend products
SPS-AS carbon fiber squeegee for duplex drum screen printing machine
SPS-AS carbon fiber squeegee is suitable for reciprocating cylinder screen printing machine. It uses carbon fiber board and Japanese ASM anti-static solvent-resistant polyurethane rubber. The printing quality is stable and the service life is high.
GM-IO is a UV curable screen printing insulating ink with excellent adhesion, high flexibility, good printability and UV curing fast drying characteristics, suitable for blood glucose meters, keyboard circuits, membrane switches and so on.
In the process of screen printing, squeegee, screen plate, substrate material and other mutual friction, generating static electricity. When static electricity accumulates to a higher voltage difference, the edge of the pattern will produce flying ink, drawing and other bad.SPS-ASM anti-static squeegee resistance <108Ω, part of the charge through the squeegee dissipation, reduce the voltage difference, to avoid flying ink and wire drawing and other problems.
In the process of cell production, the effect of screen printing will directly affect the conversion efficiency of the cell, the core of printing is the aspect ratio of the silver paste after printing. Therefore, the screen, silver paste and squeegee must remain innovative, when writing higher screen printing requirements in just ten years, the requirements of the gate line is becoming more and more fine, has been from the initial 60um into the current 30um, or even finer; Subsequent to the replacement of the squeegee (as shown in the figure below), and now SPS-AS-SL single-sided photovoltaic carbon fibre squeegee is becoming more and more popular!
FGB-MP Glass Fibre Board Squeegee
SPS-MP-X series squeegee is a new generation of one-piece squeegee specially developed by Plet and Japan Polyurethane Chemical Company for the narrow line width printing of battery cells. Compared with the traditional sanding squeegee, it has significant effect on wet weight control, printing life and efficiency improvement, etc. Using this squeegee can achieve the purpose of cost reduction and efficiency improvement.
1. Manufactured using Japanese squeegee processing, it exhibits superior solvent and wear resistance; 2. The fiberglass board scraping glue combines the fiberglass board with scraping glue, offering the elasticity of the scraping glue and the structural support of the fiberglass board. This allows for a stable printing angle to be maintained even during extended periods, ensuring uniform ink thickness.