Blog
Professional supplier of electronic screen printing solutions
这里是标题一h1占位文字
SPS Squeegee Polisher for demanding prints
Release time:
2024-04-26
We then use a magnifying glass to look at the edge, you will find that the edge is smooth. Such a knife edge printing quality is better, longer service life.
Traditional squeegee needs to use squeegee grinder to grind before printing, but the squeegee cutter has burr after grinding, SPS squeegee grinder can remove the burr of squeegee cutter after grinding conveniently.
First of all, we choose SPS brand m-type squeegee, and install it into the squeegee frame. Put the installed squeegee frame into the Dongyuan grinding machine for grinding operation, the current use of 250 mesh diamond grinding wheel, then we look at the squeegee after grinding the kerf.
Next, we use the SPS squeegee sander to polish the squeegee's edge, using a small amount of water to moisten the sandpaper. Change the angle and gently polish back and forth 5-10 times.
We then use a magnifying glass to look at the edge, you will find that the edge is smooth. Such a knife edge printing quality is better, longer service life.
The SPS squeegee sander uses 1500-2000 grit sandpaper, in order to make it easier to change the sandpaper, Plet provides cut standard sandpaper for you to choose from.
You can also learn more dynamic
